Map to STL

Your town as a 3D map

Find any place, choose how much of it you want, and get a 3D-printable map with its buildings, streets, water and parks. Put a pin on your home, colour your street, add a name, and print it in one colour or in several.

Find a place on the map and press Make my 3D map
Building your map…

Drag to rotate · scroll or pinch to zoom

1 Choose the place

Drag the map to put the right spot inside the outline. Everything inside it is printed.

1.2 km

2 Shape and size

150 mm
3.0 mm
3 mm

3 What's on the map

2×
1.0×
Roads are never thinner than 0.8 mm (paths 0.6 mm), so a 0.4 mm nozzle can print them.

4 Your spot optional

A click on the map

Choose Highlights and click a building or a street on the map to give it its own colour. Click it again to undo.

    1.0 mm

    5 Name optional

    6 Colours

    Download

    Make your map first.

      • Print flat on the bed, with 0.2 mm layers (or 0.1 mm): all heights in the map are whole 0.2 mm layers, so the colours change exactly where they should.
      • Small details print best with a 0.4 mm nozzle or smaller, 2 walls and 15% infill. No supports needed: the pin is shaped to print without them.
      • 3MF holds every part in its own colour (multi-colour) or the filament changes at the right heights (swaps): PrusaSlicer opens it ready to slice. In other slicers, add the changes from the plan above if they're missing.
      • STL: one file per colour in a ZIP (load them together as one object), or a single file for swaps and one colour.
      • Map data © OpenStreetMap contributors. Some places have less detail; the sea along a coast isn't shown.